Yocan Black Phaser Max 2 Smart Rig-2100mAh

Shop Yocan Black Phaser Max 2 Smart E-Rig vaporizer in Manitoba. Its an excellent e-rig with a 2100mAh internal battery so lots of capacity. The Phaser MAX 2 has advanced heating, OLED display, smart temperature control (440-660°F) and instant heat. It feels very comfortable to hold, it’s fun to use, and it performs great.  The settings are also simple, so it’s easy to use right out of the box. 

At the top of the Max 2 e-rig is a cone shaped glass tube, which holds water and captures the vapor. And inside that is the percolator glass, which sends the vapor through the water. There’s a firing trigger on one side and an LED screen and buttons on the side that faces you. Also at the top is where the coil is inserted. And the carb cover goes over the coil.

The Max 2 comes with a Cloud 2 coil, which fires fast and the flavour is on point.. This coil has a 360 degree ceramic chamber but you can only use concentrates in the Cloud 2 coil.  The drawback is that it takes 2.5 hours to fully charge. But on a full charge, you get 30 sessions. It charges using a USB-C.

How to Use the Yocan Max Rig:

1. Fill up the glass chamber with water up to the fill lines. You can fill it up anywhere between the three lines printed on the glass. The main idea is that it’s full enough that the percolator holes are under water, that way the vapor can pass through the water.
2. Then add your concentrate to the coil and place the carb cap over the coil. You can also add a couple of the glass pearls that Yocan includes in the box.
3. Those spin around in the coil while you’re inhaling and moves the concentrate around so you get great hits. Those are optional though, you don’t have to use them. They can be a bit difficult to clean if you leave them for a time.
4. Press the trigger five times to turn the device on and off. When it’s on, press the trigger once to set the temperature and once again to set the timer.
5. Using the buttons on the front of the Max 2, set your desired temperature and session time. You can set it anywhere between 440 and 660 degrees fahrenheit and the session time between 15 to 120 seconds.
6. Press the firing button twice to start heating the coil. It takes about 20 seconds to come to the right temperature. When it vibrates, it’s ready to hit.
7. While you’re taking a hit, press on the top of the carb cab to let air pass through the coil. Tap it every couple of seconds.
8. And when you’re done, let it cool down and clean it out.

What's in the Yocan Black Phaser Max 2 Box:

• (1) Phaser MAX 2 Vaporizer
• (1) Phaser MAX Cloud 2 Coil (Pre-installed)
• (1) Extra TGT Coil
• (1) Dab Tool
• (1) Type-C USB Cable
• (1) Cleaning Brush
• (1) User Manual